In this guide we will discuss about “How To Enable 6GHz Wi-Fi 6E Hotspot on Android Devices”. Wi-Fi 6E in its turn is the modern development of Wi-Fi 6 that encompasses the 6GHz spectrum. This band provides numbers of operators, low delay time skews, and low interferences as compared to the congested 2. 4GHz and 5GHz bands. This is translated in to quicker and dependable Web connections, particularly if multiple devices are accessing the Internet within a single locality.
Table of Contents
It would therefore be important to gain a clearer perspective of the Difference Between 2. 4GHz, 5GHz, and 6GHz Wi-Fi 6E
- 2. 4GHz Band: Provides more options but less bandwidth and often loaded by many appliances like microwave ovens, Bluetooth devices or any pre-2005 Wi-Fi standards.
- 5GHz Band: Offered the advantage of higher speed of data transfer and less crowded networks but they have limited coverage. It’s the standard for almost all the contemporary hardware systems.
- 6GHz Band: The latest arrival meant for the least disruptive, high speed, and maximum carrying capacity. It is especially suitable for such functions as streaming, gaming, or file transfer in the higher rank.
Challenges, Opportunities, and Enablement of 6GHz Wi-Fi 6E Hotspot
- Higher Speeds: Unlock the speeds up to 1. 8 Gbps and hence, activities like video streaming, gaming and transferring large files will be a breeze.
- Less Congestion: Since fewer devices capitalize on the 6GHz band today, you get more success and minimal disruption.
- Better Performance: Tops for high-population areas because it’s faster and provides a less prone connection.
Devices supporting Wi-Fi 6E include:
Currently, not all Android devices feature Wi-Fi 6E, but such flagships as Samsung, Google Pixel, OnePlus, and others do. These include Samsung’s SXX S21 Ultra, Google’s Pixel 6 Pro, Oneplus’s 9 Pro and 9T pro and Apple’s iPhone 13 Max. If the current hardware of your phone supports Wi-Fi 6E, you might be able to enable the 6GHz hotspot mode following the steps mentioned above.
Requirements That Would Allow an Android Device to Become a 6GHz Wi-Fi 6E Hotspot
Before diving into the steps, ensure you have the following:Before diving into the steps, ensure you have the following:
- Jailbroken iPhone or iPad (we will also discuss jailing in a little detail)
- Magisk, this one is used for root only on your device
- The VPN and Hotspot app that has to be installed can be downloaded from GitHub
- Some preliminary technical information concerning the change of settings in the system
Wi-Fi 6E Magisk Root for Android Device Step 1
Indeed, you need to root your device to overcome many software barriers that limit you from accessing the 6GHz band. Magisk is arguably the most popular tool form rooting android devices currently, that is because it uses systemless rooting – the process of getting administrator access without having to alter the system partition of the root location.
![Wi-Fi 6E](https://i0.wp.com/www.openaigeek.com/wp-content/uploads/2024/08/settings-Enable-6GHz-Wi-Fi-6E-Hotspot-on-Android.png?resize=576%2C368&ssl=1)
To root your device:
- There is no better way of getting the Magisk app than from the official store.
- Magisk patched boot image transfer trough your device’s custom recovery (like TWRP).
- At the end of any of these methods, use a root checker app to confirm you are now rooted.
Step 2: The VPN as well as Hotspot App can be found on GitHub at this link .
Once you root your device for instance follow the procedure outlined on this link: once your device is rooted the next thing is to download the VPN and Hotspot app which is downloadable on GitHub. This application is critical in enabling the Wireless Broadband for 6GHz. You need to find the app by its name which is recommended for your operating system, next download the APK file of the app.
Step 3: Actually launching the app and some of the settings that one is likely to come across.
After installation, open the application and go to the control control panel which allows users to configure the option of the Wi-Fi 6E hotspot. Here’s how you can adjust the settings for optimal performance:Here’s how you can adjust the settings for optimal performance:
Security Settings: WPA3-SAE
It is advisable to choose WPA3-SAE as your security standard because it provides a secure connection. WPA first of all is more secure than WPA2 due to such parameters as encryption and protection against brute force attack.
![Wi-Fi 6E](https://i0.wp.com/www.openaigeek.com/wp-content/uploads/2024/08/hotspot-Enable-6GHz-Wi-Fi-6E-Hotspot-on-Android.jpg?resize=576%2C696&ssl=1)
AP Band Configuration: Tele 69 (6295)
Furthermore, the 6GHz hotspot has one quirk in that in order for it to properly connect and utilize the 6GHz band it must be manually set to find the correct Access Point (AP) Band. It has to be tuned at 69 (6295 MHz). This is the channel that is designated to serve the 6GHz band and will assist you to gain the best speeds along with the performance.
Max Channel Bandwidth: 160MHz
To allow for the possibility of transmitting data at the highest rate, the channel bandwidth has to be set to 160MHz. This in turns enhances the rate at which information moves across the network and at the same time enhances the general performance of the network in case it is one that is shared.
Disable WiFi 7
This should be done under the app settings where WiFi 7 needs to be turned off. Since the Wi-Fi 7 is still under development and not supported by many devices, enabling it might lead to compatibility problems.
Enable WiFi 6 Only
In the settings of the wireless devices, also confirm that the use of Wi-Fi 6 only is used. This shall avoid issuing a command which causes your device to switch to older standards such as 5GHz or 2. 4GHz.
Step 4: Putting the mouse on 6GHz Wi-Fi Hotspot
Subsequently, switch on the option known as Wi-Fi HotSpot within the said application interface. Your device should now be broadcasting a 6GHz Wi-Fi network others can connect to to get a look-in. Take time and surf the internet to check on the speeds and confirm that everything is running smoothly.
Potential Challenges and Solutions
Some users may encounter issues like:Some users may encounter issues like:
- Incompatibility: 6GHz is not fully supported by some devices: check the description of your hardware.
- Instability: If you’re using the 6GHz band you may experience brief periods of instability on your device and the simplest way to rectify this is to reboot your device.
- The one way of confirming if the connection has been made successfully and the speed of the connection is to test it.
Turning on the hotspot should be done on the device and connect another device to the hotspot and conduct a speed test. You should observe a much faster connection speed than the 2. 4GHz or 5GHz hotspots. Its effectiveness will therefore depend on issues such as range, any barriers that may be in between the gadgets, and other competing networks that may be a round.
Troubleshooting Common Issues
If you experience any problems, try these troubleshooting steps:If you experience any problems, try these troubleshooting steps:
- Check on the device’s hotspot feature after which the device should be rebooted.
- The only other places which can be checked are the AP band and security settings that were probably set in the wrong way.
- Magisk has to be re-flashed if the rooting process has not been accomplished efficiently.
- There is always that risk when rooting your Android device and modifying the device settings that you may damage the device.
- It is very important to note that rootging your device will instantly null your warrant and increase you gadget’s exposure to security threats. Research the implications of the changes and remember to always create a backup of your information.
Whether or Not Unlocking 6GHz for the Standard User
In case you do not wish to root a device, all the same, it is impossible to unlock the 6GHz band. But as Wi-Fi 6E gain popularity, we may see future updates from the manufactures that innately support this feature.
Read More : “How to Enable VoLTE and VoWiFi on Pixel 8 Pro“
Conclusion
Turning on the 6GHz Wi-Fi 6E hotspot on your Android device opens the door to speed, less crowing out, and better networks. Yes, it involves some coding, but that makes it all the more perfect for those interested in getting their hands dirty. Whether it is streaming at 4K or dealing with big data transfers, the 6GHz band is a game-changer for modern wireless connectivity.
FAQs
1. Is it safe to root my Android device?
Yes, but it carries risks such as voiding your warranty and potential security vulnerabilities. Always back up your data and proceed with caution.
2. Can I enable the 6GHz hotspot on any Android device?
No, only certain high-end devices with Wi-Fi 6E hardware support can unlock the 6GHz band.
3. Do I need special apps to enable the 6GHz hotspot?
Yes, after rooting your device, you will need a specific VPN and Hotspot app from GitHub to configure the settings.
4. What kind of speeds can I expect with a 6GHz hotspot?
You can experience speeds of up to 1.8 Gbps depending on your environment and network conditions.
5. Will rooting my phone affect my ability to receive software updates?
Rooting can interfere with OTA (over-the-air) updates. You may need to manually install updates or re-root your device afterward.